제품소개
BIOCANVAS SP SERIES
Pilot In-Situ Sterilizable Fermentation Systems
Vessel Volume | 30L~1,000L |
---|---|
Agitation | AC Motor Top or Bottom Drive (Mechanical seal/Magnetic Coupling) 50~1,000rpm |
Materials & Finish | Vessel/Piping : SUS316L,SUS304(Elecrolytic polishing) |
Sterilization | Heat exchanger or inject steam into jacket.(105℃~130℃) |
Aeration | * Sparger : Ring sparger(SUS 316L) * Filter : Inlet(0.2㎛), Outlet filter(0.2㎛) |
Sensor | pH,DO,Temp,Anti-Foam, Pressure Control, etc. |
Controller | 20” Touch Screen Color LCD, PLC system |
Data Storage | pH, DO, Temperature,Foam, Pressure and Agitation speed |
Download 1 | BIOCANVAS SP Series 카탈로그(국문)_V2.1.pdf |
BIOCANVAS SP는 Pilot급 스케일의 발효에 적합한 장비이며 다양한 발효 어플리케이션을 제공합니다.
가장 최적의 배양조건에 맞게 설계되어 고객의 실험 Loss를 줄어주는 전자동 시스템과 심플한 구조로
누구나 부담없이 사용할 수 있도록 디자인 되었습니다.
교반을 위한 모터 드라이브는 상부 방식과 하부 방식으로 고객의 요구에 따라 적용 가능합니다.
발효조는 자동 멸균장치가 적용되어 발효조 내부를 편리하게 살균 및 멸균하여 사용가능하며 온도 조절
또한 설정된 값으로 균일하게 사용이 가능합니다.
오픈 프레임 구조는 밸브, 배관 작업과 유지보수가 쉽고 산소공급, 가스믹스, 등 다양한 옵션의 장치 적용이
가능하며 헤드리프트 시스템 적용 시 보다 수월하게 발효조 내부를 클리닝할 수 있습니다.
세포배양을 위한 저속의 Top Drive 방식은 매우 조용하고 안정적으로 사용이 가능하며 Bottom Drive 또한
마그네트 방식을 적용하여 조용하고 최적의 발효 수율을 얻을 수 있습니다.
Features
• 지능형 20" 와이드 터치 스크린 디스플레이 패널 적용.
• PLC SCADA 콘트롤러 시스템을 적용하여 산업용에 적합한 신뢰성과 안정성, 유지보수가 용이.
• Multi Sensor Board가 적용되어 문제 발생 시 즉각 원인 분석 가능.
• 설정값 및 현재 데이터, 파라미터의 온/오프 상태, PID 제어, 자동으로 내부 메모리카드 및 USB에 저장기능.
• 각종 바이오센서, 가스측정장비, 외장펌프 및 기타 주변기기들의 연동 제어가 가능.
• 고밀도 발효 연동 제어 가능. ( DO-stat, pH-stat, Exponential feeding, etc)
• 오토 DO Cascade 기능이 적용.
• PC 소프트웨어를 이용하여 데이터 로깅 및 실시간 시스템 원격 제어 가능.
• 자동 Top Plate 헤드리프트 시스템 적용.
• 일체형 프레임을 적용하여 간편하게 주변장치 설치가 가능.
• 자동으로 유량 및 질량을 제어 가능.
• 사용자의 편의를 위한 스텐레스 파이프 전송라인 및 완벽한 살균이 가능한 멸균 시스템 적용.
• 정밀 가공된 SUS316L 재질의 각종 노즐과 부품으로 최고의 안전성과 기밀성 제공.
• cGMP IQ / OQ 수준의 발효 시스템.
Vessel Volume | Total Capacity(Liter) | 30L 50L 70L 100L 150L 300L 500L 1000L | ||
Working vol.(Liter) | 21L 35L 50L 70L 100L 210L 350L 700L | |||
Agitation | Drive& Range | 30L ~ 1000L : AC motor Top drive(Mechanical seal driving) or Bottom Drive System | ||
Control | Manual or Automatic control of agitation speed | |||
Impellers | Rushton turbine impeller, Foam breaker (SUS316L) | |||
Sensor & Control | Magnetic hall sensor, PID control | |||
Agitation Type | Top Drive(Mechanical Seal) or Bottom Drive(Magnetic Coupling) | |||
Head Lift | The head lift system is powered by air cylinder and guided by two sets of linear motion guide | |||
Materials & Finish | Vessel/Piping | SUS 316L, SUS304(electrolytic polishing) | ||
Sterilization | Heat exchanger or inject steam into jacket. (105 ~ 130 ) | |||
Aeration | Sparger | Ring sparger(SUS 316L) | ||
Filter | Inlet(0.2um), Outlet filter(0.2um) | |||
pH | Range / Electrode | 2 ~ 14.0 pH of set point, PID control / Gel Type | ||
DO | Range / Electrode | 0 ~ 200% or 0 ~20ppm, PID Control / Polarographic Type | ||
Temperature | Range& Sensor | Ambient + 3 ℃ ~ 80 ℃ (0.1 ℃ ), RTD(Pt-100), PID control | ||
Pressure Control | The back pressure is controlled manually and / or automatically | |||
Control | Panel | 20" Touch Screen Color LCD. Built-in industrial computer | ||
Control program | Process, Tend, Calibration Mode control display | |||
Processor | PLC system | |||
Setting | Automated sterilization process | |||
Communications | Memory stick, printer, computer, etc with the RS-232C communication protocol | |||
Data Storage | pH, DO , Temperature, Pressure and Agitation speed |
● 고객의 요구사항에 따라 하드웨어 및 소프트웨어 설계 변경이 가능합니다.