Centrion

Introduction Product: Product List; LAB FERMENTORS l BIOREACTORS; PILOT FERMENTORS l BIOREACTORS; AUTOSAMPLER; CENTRIFUGE

BIO-TWINstation

Content

Features

1. Easy operation by finger, before experimentation of fermentation easy to calibrate pH, DO, temperature, foam Sensors in use of
User interface main control screen

2. Distinctive functions include various culture programming operations to control

3. Products designed for different culture experiment and applications, operation method touch screen controller and the
easy-way compact design takes up only a small space, even a small laboratory space can be used efficiently.

4. CENTRION Fermentation system is able to connect to any PC for real-time recording and control within the vessel and Intelligent
self diagnostic system to maintain fermentation process.

5. Easy control of external device by fermentation controller(O₂/CO₂analyzer, gasmixer, balancer, Level, external pump,
analog printer)

6. Eight ways microprocessor controller system using parallel communication software data Logging, remote control, including
integrated control.

7. Agitation, Temp, pH, DO, ORP, O2, Antifoam, MFC, Feed Pump, GasMix and additional parameters such as analog signals and
can be controlled through a variety.

8. 4Gas signals available to send control signals to directly 4gas controller from main control system

9. Feed function is linked to the DO Cascade and the culture of a variety of conditions that can be applied to the linked control program.

10. One PC can monitor and manage all of data by network even each controller. (1ch~8ch)

11. 1L ~ 15L Total Vol. Vessel is available in a wide range.

12 . Vessels can be easily disassembled and made the operation and the sensor and pump, analyzer, such as in/output is easy.

13. Single / Double Jacket and can be used to select the drive motor.

2CH Controller System Specifications

		Sensor
			BASIC
Display	2CH Display Control		TEMP
Agitation Range	10 ~ 1500rpm		pH
Motor drive	AC Servo Motor, BLDC Motor		DO
Max. Noise Level	< 55dB(A)		Anti-Foam
Environment	Ambient Temp 0~50℃, Humidity 85%RH		Optional
Requirements	AC110~220V, 50/60Hz,Single Phase, 500W(Free Voltage)		ORP
Weight	15Kg		OD
			CO2
			MFC
			Pressure
			Balancer

Control System	Built-in SCADA Sytem	* Built- in SCADA System
		- Voltage Specifications : 90 ~260V 50/60Hz Free Voltage
		- Built-in type SMPS Module UL certification
		- CE Product certification to enable component selection and PCB ARTWORK
		- PWM frequency control AC Servo Motor, Ac induction Motor, BLDC Motor and Is, slow down as fast and smooth implementation

		- RS232C, RS422 or RS485 communication port, USB port, apply
		- Analog input : 12 points, Analog out put : 12 points, analog record:12 points
		- Temp., pH, DO ORP, OD, O2, Co2, Agitation , MFC, Pressure Balancer Control
	Feed Control Mode	Fed-Bach Culture DO, pH interlock pump Control
Communication port	Ethernet	1PC 1-8 connected to one controller Data logging, trend graph PC Control : process control (PID, the upper and lower values, programs, cascade, Feed)
	Record Output	Each sensor can be out put by selecting data. D-SUB 25Pin Female Type, USB Excel file stored separately.
	USB	Measured data, setup data stored in the USB

peristaltic pump	Pump	4 built-in pumps, two external pump (optional)
	Motor type	AC Motor or DC Motor, minimum speed is 1rpm
	Speed range	0~70rpm
	Resolution	1rpm
	Contol mode	Programmable PID Feeding control. Pump can be as signed for Acid, Base, Antifoam, Feed
Bottom Heating Plate	Range	Up to 90℃
	Resolution	0.1℃
	Power source	100-120V~50/60Hz or 210-230V~50/60Hz With electrical safety cut off switch

Vessel	Total Volume(Liter)	1.5L 3L 5L 7L 10L 15L
	Working volume(Liter)	1L 2.2L 3L 5L 7L 12L
	Material	Borocilicate glass Autoclavable, SUS316L Stainless steel for Top plate and all fittings
	Etc.	Single & Double 1.5L ~ 15L Total Vol. pH, DO, Foam, Level, Pressure Probe, Addition Ports, Exhaust Port, Baffles 316L, Condenser
Aeration	Flow rate	0 ~ 10LPM 0 ~ 20LPM
	Option	Air Flow Meter / Mass Flow Controller / Mass Flow Manual
	Sparger	Standard : Ring Sparger / Micro Spager (1 ~ 20um)
	Inlet Filter	0.2um Disposable Hydrophobic Filter
Agitation	Drive	Driect Top Drive Servo Motor 200W ~ 400W, Single Mechanical seal
	Range	30 ~ 1500rpm
	Impellers	Rushton Standard With Fermentation / Pitched Blade Standard With Cell Culture Marine Blade or Spin Filter Note : Customized Impellers are available
pH	Range / Resolution	2 ~14.0pH of set point, PID Control / Gel Type
	Probe	Electrode Autoclavable, Hamilton or Mettler Toledo (temperature range - 0 ~ 140℃, the maximum pressure - 6bar)
	Control mode	Programmable PID Control system
DO	Range / Resolution	0 ~ 200% OR 0 ~ 20ppm / 0.1%
	Probe	Electrode Autoclavable Polarographic or Galvanic Oxygen Sensor - Hamilton or Mettler Toledo
	Control mode	Programmable PID Control system DO cascade to Agitation, Mass Flow, Feeding Pump Control Oxygen enrichment module(Optional), Gas Mixing Station Module (Optional)
ORP	Range / Resolution	Measuring range - 1000 ~ -1000 mv. / 1mV
	Probe	Electrode Autoclavable Redox potential, Oxidation of measurements - Hamilton or Mettler Toledo (temperature range - 0 ~ 140℃, the maximum pressure - 2.5bar)
Anti Foam	Range / Sensor	Conductivity 0 ~ 300kΩ (Measuring the amount of foam)
OD (Optional)	Range / Sensor	Measuring range 0 … 100 EBC 0 … 100EBC0 …400FTU (Turbidity measurement)
MFM or MFC (Optional)	Range / Sensor	0 ~ 10L/min (Air flow measurement) / Mass Flow Meter / Mass Flow Control
Level Sensor (Optional)	Control	Electrode type Hi/Low Vessel Level control
Balancer (Optional)	Control	9,999.99g / RS232C by the amount of weight on the scale output
Analog Input &output	Control	Various sensors are available by utilizing the analog input / output port
Analog Recording	Control	It can be the sensor output data value via the analog recording

Network Service System

Main Screen